Courtesy Lamp Replacement - IP (Right Side)

REMOVAL PROCEDURE
1. Remove the right closeout/insulator panel.
2. Remove the screw that retains the courtesy lamp socket to the lower tie bar.
3. Remove the lamp from the socket.

INSTALLATION PROCEDURE
1. Install the lamp to the socket.
2. Install the courtesy lamp socket to the lower tie bar.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the courtesy lamp socket screw to the lower tie bar.

Tighten
Tighten the socket retaining screw to 1.4 N.m (12 lb in).

4. Install the right insulator panel.