Courtesy Lamp Replacement - IP (Left Side)

REMOVAL PROCEDURE
1. Remove the left closeout/insulator panel.
2. Remove the screw that retains the courtesy lamp socket to the knee bolster.
3. Remove the lamp from the socket.

INSTALLATION PROCEDURE
1. Install the lamp to the socket.
2. Install the courtesy lamp socket to the knee bolster.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the courtesy lamp socket screw to the knee bolster.

Tighten
Tighten the socket retaining screw to 1.4 N.m (12 lb in).

4. Install the left insulator panel.