Rear Bumper Bracket Replacement (Pickup)

Rear Bumper Bracket Replacement (Pickup)

Removal Procedure




1. Remove the rear bumper impact bar.
2. Remove the bolt securing the rear step brace to the rear bumper bracket, if equipped.
3. Remove 3 nuts and bolts securing the rear bumper bracket to each frame rail.
4. Remove the rear bumper bracket from the frame rail.

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the rear bumper bracket to each frame rail with 3 nuts and bolts.

Tighten the rear bumper bracket bolts to 90 N.m (66 lb ft).

2. Install the bolt securing the rear step brace to the rear bumper bracket, if equipped.

Tighten the rear step brace bolt to 9 N.m (7 lb ft).

3. Install the rear bumper impact bar.