Wiring Harness Replacement - Sliding Door

REMOVAL PROCEDURE




1. Remove the trim panel.
2. Remove the water deflector.
3. Remove the upper access cover (cargo van).
4. Disconnect the electrical connector (5) from the lock assembly.
5. Disconnect the electrical connectors (2) from the contact switch.
6. Remove the harness clips from the door (4).
7. Remove the wiring harness from the door (3).

INSTALLATION PROCEDURE




1. Install the wiring harness to the door (3).
2. Install the harness clips to the door (4).
3. Connect the electrical connectors to the contact switch (2).
4. Connect the electrical connector (5) to the lock assembly.
5. Install the upper access cover (cargo van).
6. Install the water deflector.
7. Install the trim panel.