Hazard Lamps

When the turn/hazard switch is in the hazard position, voltage is supplied from the STOP/HAZ fuse at all times through the turn/hazard switch to the turn/hazard flasher via CKT 140 (ORN). The flasher then passes current back to the turn/hazard switch in an intermittent on off pattern through CKT 16 (PPL). From the turn/hazard switch, voltage is supplied to the LT TURN and the RT TURN lamps through CKT 14 (LT BLU) or CKT 15 (DK BLU).

For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID Application and ID