Horn: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Remove the grille from the vehicle.
3. Disconnect the horn electrical connector.
4. Remove the horn bolt.
5. Remove the horn from the vehicle.

INSTALLATION PROCEDURE

1. Install the horn.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the horn bolt.

Tighten
Tighten the horn bolt to 25 N.m (18 lb ft).

3. Connect the electrical connector to the horn.
4. Install the grille to the vehicle.
5. Connect the negative battery cable.