Horn Switch

Removal Procedure
1. Disconnect the battery negative cable.
2. Disable the supplemental inflatable restraint (SIR) system. Refer to Disabling the SIR System in Restraint Systems.
3. Remove the steering wheel inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Restraint Systems.
4. Remove the horn plunger contact from the steering wheel.





5. Remove the 4 screws that connect the horn contact switch to the steering wheel.
6. Remove the horn switch assembly.

Installation Procedure
1. Install the horn contact switch assembly to the steering wheel.





2. Install the four screws.
Tighten the screws until the screws are fully driven and seated. Do not strip the screws.
3. Install the horn plunger contact to the cam tower in the steering wheel.
4. Install the steering wheel inflator module to the steering wheel. Refer to Inflatable Restraint Steering Wheel Module Replacement in Restraint Systems.
5. Enable the supplemental inflatable restraint (SIR) system. Refer to Enabling the SIR System in Restraint Systems.
6. Connect the battery negative cable.