Lock Lever Replacement - Remote

Lock Lever Replacement - Remote

Tools Required

M 39010 Heavy Duty Rivet Gun


Removal Procedure

1. Remove the trim panel. Refer to Door Trim Panel Replacement (Service and Repair) .
2. Use a sharp bladed tool in order to separate the water deflector at the perforations. Refer to Front Side Door Water Deflector Replacement. Service and Repair




3. Remove the lock rods from the remote lock lever.




4. Use a 5 mm (3/16 in) drill bit in order to drill out the head of the door rivets and remove the remote lock lever to door rivets.
5. Remove the lock lever from the clip (2).
6. Remove the lock lever from the door.



Installation Procedure

1. Install the lock rod lever to the door.





Important: Install new plastic retainer clips whenever the lock rods are removed.


2. Install the remote lock lever to the clip (2).
3. Use the M 39010 in order to install door rivets.




4. Install the lock rods to the remote lock lever.
5. Install the water deflector and the armrest bracket. Refer to Front Side Door Water Deflector Replacement. Service and Repair
6. Install the trim panel. Refer to Door Trim Panel Replacement. Service and Repair