Blower Motor and Fan Replacement - Auxiliary

REMOVAL PROCEDURE




1. Remove the left body side trim panel.
2. Remove the cooling tube from the case and the motor.
3. Remove the electrical connectors.
4. Remove the screws that retain the blower motor to the case.
5. Remove the blower motor and the fan assembly from the case.

INSTALLATION PROCEDURE




1. Install the blower motor and the fan assembly to the case.
2. Install the screws that retain the blower motor to the case.

Tighten
Tighten the screws that retain the blower motor to the case to 2 N.m (18 lb in).

3. Install the electrical connectors.
4. Install the cooling tube to the motor and to the case.
5. Install the left body side rear trim panel.