Front Seat Replacement - Bucket

Front Seat Replacement - Bucket

Removal Procedure

1. Disconnect the electrical connector from the seat adjuster, if equipped.
2. Disconnect the electrical connector from the seat belt buckle.




3. Remove the nuts (3) that retain the seat assembly to the vehicle.
4. Remove the front seat assembly from the vehicle.



Installation Procedure





1. Install the front seat assembly to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the nuts (3) in order to retain the seat assembly to the vehicle.

Tighten the nuts to 60 N.m (44 lb ft).

3. Connect the electrical connector to the seat adjuster, if equipped.
4. Connect the electrical connector to the seat belt buckle.