87. Valve Rocker Arm Cover Installation - Left

1. If valve rocker arm cover gasket was removed from the valve rocker arm cover, install a NEW valve rocker arm cover gasket.
2. Install the valve rocker arm cover with gasket.





3. Install the spark plug wiring harness bracket(s) onto the valve rocker arm cover.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the valve rocker arm cover bolts.
^ Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.).





5. Remove the Positive Crankcase Ventilation Valve (PCV) and crankcase ventilation tube.