Keyless Entry

The remote control door lock receiver replaces the illuminated entry module for vehicles equipped with remote keyless entry. The remote control door lock receiver provides a lamps-off delay after all of the doors are closed, as described in Illuminated Entry Module above. The remote control door lock receiver also turns on the dome lamps and the optional stepwell lamps when the vehicle's doors unlock remotely. The lamps remain lighted for approximately 40 seconds or until the ignition switch is in the RUN position or in the START position.

The remote control door lock receiver has voltage available at all times from the PWR ACCY fuse A through CKT 540 (ORN). The remote control door lock receiver is grounded through CKT 150 (BLK). Export models with anti-theft provisions also use the remote control door lock receiver to activate the lighting control relay. When the lighting control relay is activated, it flashes the turn signal lamps.