CD Changer From Bracket Removal

REMOVAL PROCEDURE




1. Remove the radio.
2. Detach the clip retaining the HVAC harness to the radio mounting bracket.
3. Remove the screws (1) retaining the radio mounting bracket (2) to the instrument panel carrier (3).




4. Remove the radio mounting bracket from the, vehicle.

INSTALLATION PROCEDURE




1. Install the radio mounting bracket (2) to the vehicle.
2. Attach the HVAC harness to the radio mounting bracket with the clip.




3. Install the screws in order to retain the radio mounting bracket to the instrument panel carrier.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the radio mounting bracket screws to 3 N.m (27 lb in).

4. Install the radio.