Front Seat Adjuster Replacement (All )

Front Seat Adjuster Replacement (All )

Removal Procedure





1. Raise the seat to the full UP position, if equipped with power seats.
2. Disconnect the electrical connectors from the power seat motors, if equipped.




3. Remove the nuts (3) retaining the seat adjuster (2) to the seat riser (4).
4. Remove the front seat and the seat adjuster from the seat riser.
5. Remove the bolts retaining the seat adjuster from the seat.
6. Remove the seat adjuster from the seat.



Installation Procedure





1. Install the seat adjuster (2) to the seat.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts in order to retain the seat adjuster to the seat.

Tighten the bolts in order to retain the seat adjuster (2) to the seat to 25 N.m (18 lb ft).





3. Install the front seat and the seat adjuster (2) to the seat riser (4).
4. Install the nuts (3) in order to retain the seat adjuster to the seat riser.

Tighten the nuts (3) in order to retain the seat adjuster (2) to the seat riser (4) to 45 N.m (33 lb ft).

5. Connect the electrical connectors to the power seat motors, if equipped.