Front

REMOVAL PROCEDURE
1. Lift the buckle cover.
2. Remove the seat belt buckle retaining bolt from the seat.
3. Disconnect the electrical connector from the seat belt buckle, if equipped.
4. Remove the seat belt buckle from the seat.

INSTALLATION PROCEDURE
1. Install the seat belt buckle to the seat.
2. Connect the electrical connector to the seat belt buckle, if equipped.
3. Lift the buckle cover.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the seat belt buckle retaining bolt to the seat.

Tighten
Tighten the seat belt buckle retaining bolt to 52 N.m (38 lb ft).