36. Timing Chain and Sprockets Clean and Inspect

Timing Chain and Sprockets Cleaning and Inspection





1. Clean the camshaft timing components in solvent.

Caution: Refer to Safety Glasses Caution in Service Precautions.

2. Dry the components with compressed air.
3. Inspect the camshaft timing chain for binding or wear.





Important: If the sprocket(s) must be replaced, replace both sprockets to ensure that timing chain centerline alignment is maintained.

4. Inspect the camshaft and crankshaft sprockets for the following conditions:
- Worn teeth (1)
- Damaged teeth (2)
- Chipped teeth (3)
- Uneven wear on one edge of the teeth
- Worn valleys between the sprocket teeth
- Crankshaft sprocket keyway for wear