Glove Compartment: Service and Repair

REMOVAL PROCEDURE




1. Close the IP compartment door.
2. Drill out the 2 rivets (2).
3. Remove IP storage compartment door retaining screws (1) from the instrument panel.
4. Remove the IP compartment door.

INSTALLATION PROCEDURE




1. Install the IP compartment door.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the IP compartment retaining screws (1) to the instrument panel.

Tighten
Tighten the screws to 1.9 N.m (17 lb in).