Right Valve Rocker Arm Cover

Valve Rocker Arm Cover Installation - Right





1. Install a new valve rocker arm cover gasket if the gasket was removed from the valve rocker arm cover.
2. Install the valve rocker arm cover.
3. Install the valve rocker arm cover bolts.





Notice: Refer to Fastener Notice in Service Precautions.

4. Tighten the valve rocker arm cover bolts in sequence using two passes.
4.1. Tighten the valve rocker arm cover bolts to 6 Nm (54 inch lbs.) for the first pass.
4.2. Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.) for the second pass.