Clunk on Acceleration or Deceleration

Clunk on Acceleration or Deceleration





Test 1-7

Diagnostic Aids
There are a few factors to know when there is a clunk in acceleration or deceleration. You should always check the engine mounts for looseness or damage. Also check the clutch driven plate to see if it is worn or damaged. Sometimes the clunk noise may come from worn or damaged universal joints.

Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
2. This step inspects for loose or damaged engine mounts
4. This step inspects for worn or damaged driven clutch plate.
6. This step inspects for worn or damaged universal joints.