Crankshaft, Engine

Crankshaft Bearing Cap Bolts	(Inner Bolts-12 mm) First Pass	55 Foot Pound-Force (ft.lb)
	(Inner Bolts-12 mm) Second Pass	55 Foot Pound-Force (ft.lb)
	(Inner Bolts-12 mm) Final Pass	+ 90 degrees
	(Outer Bolts-12 mm) First Pass	48 Foot Pound-Force (ft.lb)
	(Outer Bolts-12 mm) Second Pass	48 Foot Pound-Force (ft.lb)
	(Outer Bolts-12 mm) Final Pass	+ 90 degrees
	(Outer Bolts-1 0 mm) Single Pass	30 Foot Pound-Force (ft.lb)
Crankshaft Journal (Main)	OD (White) (1-4)	2.9501-2.9504 Inch (in)
	OD (White) (5)	2.9251-2.9502 Inch (in)
	OD (Orange or Red) (1-4)	2.9498-2.9501 Inch (in)
	OD (Orange or Red) (5)	2.9496-2.9499 Inch (in)
	OD (Blue) (1-4)	2.9494-2.9498 Inch (in)
	OD (Blue) (5)	2.9493-2.9496 Inch (in)
	Taper (Maximum)	0.0033 Inch (in)
	Out-of-Round (Maximum)	0.0033 Inch (in)
	Bearing Clearance (1-4)	0.0018-0.0033 Inch (in)
	Bearing Clearance (5)	0.0022-0.0037 Inch (in)
Crankshaft Journal (Rod)	OD (Yellow)	2.3987-2.3992 Inch (in)
	OD (Green	2.3990-2.4000 Inch (in)
	Taper (Maximum)	0.0002 Inch (in)
	Out-of-Round (Maximum)	0.0002 Inch (in)
	Bearing Clearance	0.0014-0.0037 Inch (in)
	Side Clearance (Rod)	0.0067-0.0250
	End Play (Crankshaft)	0.0040-0.0110 Inch (in)
Crankshaft Bearing (Main)-Select Fit: Refer to Crankshaft and Bearings Installation (L65).	White (1)	STD in Case, STD in Cap
	White (2)	0.0005 in U.S. in Case,STD in Cap
	White (3)	0.0010 in U.S. in Case, STD in Cap
	Orange or Red (1)	STD in Case, 0.0005 in U.S. in Cap
	Orange or Red (2)	0.0005 in U.S. in Case, 0.0005 in U.S. in Cap
	Orange or Red (3)	0.0010 in U.S. in Case, 0.0005 in U.S. in Cap
	Blue (1)	STD in Case, 0.0010 in U.S. in Cap
	Blue (2)	0.0005 in U.S. in Case, 0.0010 in U.S. in Cap
	Blue (3)	0.0010 in U.S. in Case, 0.0010 in U.S. in Cap
Crankshaft Bearing (Rod)-Select Fit: Refer to Crankshaft and Bearings Installation (L65).	Yellow	STD in Rod, STD in Cap
	Green	STD in Rod, 0.0010 in U.S. in Cap