Manual Trans

Engine Flywheel Cleaning and Inspection (MT)
1. Clean the engine flywheel in solvent.

Caution: Refer to Safety Glasses Caution in Service Precautions.

2. Dry the engine flywheel with compressed air.





3. Inspect the manual transmission engine flywheel for the following conditions:
- Pitted surface (1)
- Scoring or grooves (2)
- Rust or other surface damage (3)
- Damaged ring gear teeth (4)
- Loose or improperly positioned ring gear The ring gear has an interference fit onto the engine flywheel and should be positioned completely against the flange of the engine flywheel.