Oil Pressure Sensor: Service and Repair
ENGINE OIL PRESSURE SENSOR OR SWITCH REPLACEMENTTOOLS REQUIRED
J 25254-10 A Oil Pressure Sensor Socket
REMOVAL PROCEDURE
1. Disconnect the electrical connector from the engine pressure sensor/switch.
2. Remove the oil pressure sensor using J 25254-10 A.
INSTALLATION PROCEDURE
1. Install the oil pressure sensor.
2. Hold the oil pressure sensor fitting with a wrench to prevent from turning.
Tighten
Using J 25254-10 A tighten the oil pressure sensor to 30 N.m (22 lb ft).
3. Install the electrical connector.