Front Bumper Replacement (Steel Channel Bumper)

Front Bumper Replacement (Steel Channel Bumper)

Removal Procedure

1. Support the bumper.




2. Remove the lower bolts, the washers, and the nuts that are holding the bumper to the brackets or the extension.




3. Remove the upper bolts, the washers and the nuts.
4. Remove the bumper from the brackets.

Installation Procedure

1. Support the bumper.




2. Install the upper bolts, the washers, and the nuts through the bumper to the brackets or the extension.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the lower bolts, the washers, and the nuts that attach the bumper to the brackets or the extension.

* Tighten the bumper nuts to 65 Nm (48 lb ft).
* Tighten the bumper bracket bolts to 70 Nm (52 lb ft).