Shutter Assembly Replacement

Shutter Assembly Replacement

Removal Procedure




1. Remove the radiator shutter assembly mounting bolts.
2. Remove the radiator shutter assembly from the radiator lower mounting panel.

Installation Procedure




1. Install the radiator shutter assembly to the radiator lower mounting panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the radiator shutter assembly mounting bolts.

* Tighten the air radiator shutter mounting air bolt to 30 Nm (22 lb ft).
* Tighten the hydraulic radiator shutter mounting hydraulic bolt to 40 Nm (30 lb ft).

3. Install the hydraulic lines or the air lines to the radiator shutter actuator.