HVAC Control Module Replacement

HVAC Control Module Replacement

Removal Procedure




1. Remove the IP bezel assembly screws.
2. Remove the IP bezel assembly.
3. Remove the radio. Refer to Radio Replacement Service and Repair in Entertainment.




4. Remove the HVAC control module screws.
5. Remove the HVAC control module from the instrument panel.
6. Disconnect the electrical connectors.

Installation Procedure




1. Connect the electrical connectors.
2. Install the HVAC control module to the instrument panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the HVAC control module screws.

Tighten the screws to 2 Nm (18 lb in).

4. Install the radio. Refer to Radio Replacement Service and Repair in Entertainment.




5. Install the IP bezel assembly.
6. Install the IP bezel assembly screws.

Tighten the screws to 2 Nm (18 lb in).