Park/Turn Signal Lamp Bulb Replacement

Park/Turn Signal Lamp Bulb Replacement

Removal Procedure




1. In order to remove the lens from the lamp housing, insert a small flat-bladed tool into the slot on the lens and apply a slight twisting motion.
2. In order to remove the bulb, perform the following steps:

1. Press the bulb into the socket.
2. Turn the bulb to the left.
3. Pull out the bulb.

Installation Procedure




1. In order to install the bulb, press the bulb into the socket and turn it to the right.
2. Install the lens to the lamp housing.