Roof Marker Lamp Replacement (Delete)

Roof Marker Lamp Replacement (Delete)

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.




2. Remove the lens screws.
3. Remove the lens.
4. In order to remove the insulator, pull the socket and harness assembly through the insulator.
5. Disconnect the harness assembly electrical connector.

Installation Procedure




1. Connect the harness assembly electrical connector.
2. In order to install the insulator, push the socket and harness assembly into the insulator and align the holes on the cab.
3. Install the lens.
4. Install the lens screws.
5. Connect the negative battery cable.