Heater Inlet Hose Replacement (LG5)

Heater Inlet Hose Replacement (LG5)

Removal Procedure

1. Remove the right wheelhouse panel. Refer to Wheelhouse Panel Replacement Service and Repair in Body Front End.




2. Drain the engine coolant. Refer to Cooling System Draining and Filling Cooling System Draining and Filling in Engine Cooling.
3. Disconnect the hose clamps.
4. Disconnect the inlet hose from the heater core.
5. Disconnect the inlet hose from the coolant valve fitting.




6. Disconnect the coolant valve inlet hose from the engine block.
7. Disconnect the hose outlet from the engine block.

Installation Procedure




1. Connect the hose to the engine block.
2. Connect the hose to the coolant valve inlet.




3. Connect the inlet hose to the coolant valve fitting.
4. Connect the inlet hose to the heater core.
5. Connect the hose clamps.
6. Add the engine coolant. Refer to Cooling System Draining and Filling Cooling System Draining and Filling in Engine Cooling.
7. Install the right wheelhouse panel. Refer to Wheelhouse Panel Replacement Service and Repair in Body Front End.