Steering Column Lock Cylinder Set - Assemble - Off Vehicle

Steering Column Lock Cylinder Set - Assemble - Off Vehicle




1. Install the steering column lock cylinder set (1) into the steering column housing assembly.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the lock retaining screw (2) into the steering column housing assembly.

Tighten the lock retaining screw (2) to 2.5 Nm (22 lb in).

3. If necessary, connect the connector of the steering column lock cylinder set.
4. Install the turn signal switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle.