Steering Column Lock Cylinder Set - Disassemble - Off Vehicle

Steering Column Lock Cylinder Set - Disassemble - Off Vehicle

Disassembly Procedure




1. Remove the turn signal switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle.
2. The key must be in the LOCK position.
3. If necessary, disconnect the connector of the steering column lock cylinder set.
4. Remove the lock retaining screw (2) from the steering column housing assembly.
5. Remove the steering column lock cylinder set (1) from the steering column housing assembly.