Windshield Wiper and Washer Switch Assembly - Assemble - Off Vehicle

Windshield Wiper and Washer Switch Assembly - Assemble - Off Vehicle




1. Insert the windshield wiper and washer switch assembly connector through the steering column housing assembly, if needed.
2. Lubricate the switch actuator pivot pin (2) with lithium grease.
3. Install the switch actuator pivot pin (2) into the windshield wiper and washer switch assembly (1).
4. If necessary, connect the connector of the windshield wiper and washer switch assembly at the base of the steering column
5. Install the lock housing cover assembly. Refer to Lock Housing Assembly - Assemble - Off Vehicle Lock Housing Assembly - Assemble - Off Vehicle.