Windshield Wiper and Washer Switch Assembly - Disassemble - Off Vehicle

Windshield Wiper and Washer Switch Assembly - Disassemble - Off Vehicle




1. Remove the lock housing cover assembly. Refer to Lock Housing Assembly - Disassemble - Off Vehicle Lock Housing Assembly - Disassemble - Off Vehicle.
2. Remove the switch actuator pivot pin (2) from the windshield wiper and washer switch assembly (1).
3. If necessary, remove the wire harness straps.
4. If necessary, disconnect the connector of the windshield wiper and washer switch assembly at the base of the column.
5. Pull the windshield wiper and washer switch assembly connector through the steering column, if needed.