Shift Lever - Without Tow/Haul Switch

Removal Procedure





1. Roll back the seal until the TORX head screw (2) is exposed.
2. Remove the TORXS head screw (2).
3. Remove the shift lever (1).


Installation Procedure





1. Install the shift lever (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the TORX head screw (2).
- Tighten the screw to 1.5 Nm (13 inch lbs.).
3. Roll the seal over the TORX head screw (2).