Lubricant Replacement

Lubricant Change
Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the front differential carrier shield (if equipped).
3. Clean the area around the front axle fill plug and the drain plug.
4. Remove the fill plug (1).
5. Remove the drain plug (2).
6. Drain the fluid from the front axle differential.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the drain plug (2).
^ Tighten the drain plug to 33 Nm (24 ft. lbs.).
2. Fill the front differential with lubricant. Use the proper fluid.
3. Install the fill plug (1).
^ Tighten the fill plug to 33 Nm (24 ft. lbs.).
4. Install the front differential carrier shield (if equipped).
5. Lower the vehicle.