Scan Tool Data Definitions - Input 1

DOOR HANDLE SWITCH: The scan tool displays the position of the door handle. The scan tool displays ACTIVE when a door handle is raised and INACTIVE with all doors closed and the door handles at rest.

DRIVERS DOOR JAMB SWITCH: The scan tool displays the position of the drivers door. The scan tool displays ACTIVE when the drivers door is open. Ignition 1: The scan tool displays the position of the ignition switch. The scan tool displays ACTIVE when the ignition switch is in the RUN or CRANK position.

IGNITION 3: The scan tool displays the position of the ignition switch. The scan tool displays ACTIVE when the ignition switch is in the RUN position only.

IGNITION POWER MODE: The scan tool displays the position of the ignition switch. The scan tool displays OFF, RUN, CRANK and UNKNOWN. The UNKNOWN display is when the BCM can not determine the position of the ignition switch (between the OFF and RUN positions).

KEY-IN-IGNITION: The scan tool displays the position of the ignition key in the ignition switch cylinder. The scan tool displays YES when the ignition key is fully inserted into the ignition switch cylinder. The BCM uses this data in controlling the operation of the reminder chime feature.

RETAINED ACCESSORY POWER (RAP) RELAY
FEEDBACK: The scan tool displays the state of the RAP relay. The scan tool displays ON when the BCM activates the RAP relay.