A Symptoms - Selectable Ride

Important: Review the Selectable Ride Description and Operation in order to familiarize yourself with the system functions. Refer to Selectable Ride Description and Operation.


Visual/Physical Inspection
^ Inspect for aftermarket devices which could affect the operation of the Selectable ride System. Refer to Checking Aftermarket Accessories in Diagrams/Diagnostic Aids.
^ Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
^ Inspect the SEO IGN fuse. If the fuse is open, locate the source of the overload and repair. Replace the fuse. Refer to Testing for Short to Ground in Diagrams/Diagnostic Aids.
^ Inspect grounds for front and rear shocks to be clean and tight.
^ Inspect all inline connectors and the connectors at the shocks to be properly seated and free of corrosion.


Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent and Poor Connections in Diagrams/Diagnostic Aids.


Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

^ Selectable Ride Indicator Always On
Selectable Ride Indicator Always On

^ Ride Does Not Change When Switched (ON - OFF)
Ride Does Not Change When Switched (ON - OFF)

^ Selectable Ride Indicator Lamp Does Not Light
Selectable Ride Indicator Lamp Does Not Light

^ One Shock Does Not Operate
One Shock Does Not Operate