Liftgate Replacement

Liftgate Replacement

Removal Procedure




1. Open the lift gate.
2. Support the lift gate.
3. Remove the roof rear header garnish molding.
4. Disconnect the electrical connectors, as needed.
5. Disconnect the lift gate window washer fluid hose.
6. Remove the lift gate struts.
7. Remove the bolts retaining the lift gate hinge to the body mounted hinge locator.
8. With an assistant, remove the lift gate.

Installation Procedure

1. With an assistant, install the lift gate to the vehicle.





Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts that retain the lift gate to the body.

Tighten the bolts to 25 N.m (18 lb ft).

3. Install the lift gate struts.
4. Connect the washer fluid hose.
5. Connect the electrical connectors, as needed.
6. Install the roof rear header garnish molding.