Noisy

Transmission Noisy





Test 1-12

Diagnostic Aids
The manual transmission can be noisy for a number of reason, from being noisy in neutral, low, high and reverse gear. Diagnosis the transmission from the level of fluid to the right type of fluid in the transmission. Inspect for misalignment or loose bolts to the engine. The transmission could be noisy internally from the gears, synchronizers, bearings this should be inspected for worn or damaged parts. These are only a few areas that may cause the transmission to be noisy, you should inspect all possibilities that could lead you to the noise of these concerns.

Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
2. This step is checking for the correct fluid level.
4. This step is checking for the correct type of transmission fluid.
10. This step is checking for internal damage or worn parts.