Lumbar Bladder Replacement

Lumbar Bladder Replacement

Removal Procedure





1. Remove the seat from the vehicle.
2. Tilt the seat back forward and place the seat assembly upside-down.
3. Remove the seat back panel lower retainer from the seat frame.
4. Remove the seat back cover.
5. Remove the rubber hose between the bladder and the pump.
Place a hand down inside the seat back and disconnect the bladder mounting bars from the round hooks on the frame.
6. Slide the bladder downward and off the mounting bars (1).
7. Remove the bladder from the seat back.



Installation Procedure





1. Position the bladder inside the seat back on the mounting bars (1) and slide upward.
2. Install the bladder mounting bars to the round hooks on the frame.
3. Install the rubber hose between the bladder and the pump.
4. Install the seat back cover.
5. Install the seat back panel lower retainer to the seat frame.
6. Install the seat assembly into the vehicle.