15. Valve Rocker Arm Cover Removal - Left

Valve Rocker Arm Cover Removal - Left

Important: Do not remove the ignition coils and bracket from the valve rocker arm cover unless required.
Do not remove the Positive Crankcase Ventilation (PCV) valve grommet from the cover unless service is required.





1. Remove the ignition coil bracket bolts from the rocker arm cover, if required.
2. Remove the ignition coil and bracket assembly from the cover.





3. Remove the valve rocker arm cover bolts.
4. Remove the valve rocker arm cover.





5. Remove the gasket (1) from the cover.
6. Discard the gasket.
The bolt grommets may be reused if not damaged.