With Manual Transmission

Engine Flywheel Installation (C/K with MT)





1. Install the engine flywheel.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the engine flywheel bolts.
2.1. Tighten the engine flywheel bolts to 40 Nm (30 ft. lbs.) for the first pass.
2.2. Tighten the engine flywheel bolts to 80 Nm (59 ft. lbs.) for the second pass.
2.3. Tighten the engine flywheel bolts to 100 Nm (74 ft. lbs.) for the final pass.