Operation CHARM: Car repair manuals for everyone.

Power Trunk / Liftgate Lock Actuator: Service and Repair



Rear Compartment Lid Lock Actuator Replacement

Tools Required

J 34940 Rivet Gun

Removal Procedure




1. Remove the endgate cover.
2. Disconnect the electrical connectors, as needed.
3. Drill out the rivets that retain the endgate window release actuator to the endgate cover.
4. Remove the endgate window release actuator from the endgate cover.

Installation Procedure




1. Install the endgate window release actuator to the endgate cover.
2. Install the rivets that retain the endgate window release actuator to the endgate cover using the J 34940.
3. Connect the electrical connectors, as needed.
4. Install the endgate cover.