Radiator Grille Guard Replacement (Diamond Edition)

Radiator Grille Guard Replacement (Diamond Edition)

Removal Procedure




1. Remove the skid plate from the grille guard assembly.
2. Remove 2 bolts and spacers securing the grille guard to the front bumper impact bar.
3. Remove 2 bolts securing the grille guard assembly to the lower grille guard adjust bracket.
4. Disconnect the electrical connectors from the fog lamp assemblies.
5. Remove the grille guard assembly.
6. Remove each fog lamp assembly by removing 2 bolts.
7. Remove 2 bolts securing the lower grille guard adjust bracket to the lower grille guard bracket.
8. Remove 4 bolts securing the lower grille guard to the left and right front body mounts
9. Remove the lower grille guard bracket.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.




1. Install the lower grille guard to the left and right front body mounts with 4 bolts.

Tighten the lower grille guard bolts to 45 N.m (33 lb ft).

2. Install the lower grille guard adjust bracket to the lower grille guard bracket with 2 bolts.

Tighten the adjust bracket bolts to 45 N.m (33 lb ft).

3. Install each for lamp assembly to the grille guard with 2 bolts.

Tighten the fog lamp bolts to 9 N.m (7 lb ft).

4. Connect the electrical connectors to the fog lamp assemblies.
5. Install the grille guard assembly to the lower grille guard adjust bracket with 2 bolts.

Tighten the grille guard bolts to 45 N.m (33 lb ft).

6. Install the grille guard to the front bumper impact bar with 2 bolts and spacers.

Tighten the grille guard bolts to 45 N.m (33 lb ft).

7. Install the skid plate to the grille guard assembly.