Close From Open Position

To close the power sunroof from the open position is the same as to opening the sunroof glass to the vent position. Turn the ignition ON, with the engine OFF. Press and hold the sunroof switch (forward portion). This will apply the sunroof switch low reference to the sunroof switch close signal circuit (5 volt reference) input to drop to 0 volts. As long as the sunroof module sees a constant input request from the sunroof switch close signal circuit (0 volts), the module will continue to slide the sunroof glass to the closed position. The sunroof glass will stop (soft stop) at the closed position based on the inputs from the limit switches. The sunshade will have to be manually slide closed.