| Lower Intake Manifold Bolt | First Pass in Sequence | 27 Inch Pound-Force (in.lb) |
| Second Pass in Sequence | 106 Inch Pound-Force (in.lb) |
| Final Pass in Sequence | 11 Foot Pound-Force (ft.lb) |
| Upper Intake Manifold Stud | First Pass | 44 Inch Pound-Force (in.lb) |
| Final Pass | 80 Inch Pound-Force (in.lb) |
| Engine Wiring Harness Bracket Nut to Intake Manifold | | 106 Inch Pound-Force (in.lb) |
| EGR Valve Inlet Pipe Nut at Intake Manifold | | 18 Foot Pound-Force (ft.lb) |
| Evaporative Emission (EVAP) Canister Purge Solenoid Valve Nut to Intake Manifold | | 89 Inch Pound-Force (in.lb) |
| Surface Flatness | | 0.004 (Maximum) Inch (in) |
| Intake Air Duct Clamp | | 44 Inch Pound-Force (in.lb) |