Operation CHARM: Car repair manuals for everyone.
Home >> GMC Truck >> 2001 >> S15/T15 Jimmy 2WD V6-4.3L VIN W >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Heating, Ventilation and Air Conditioning >> Blower Motor Replacement (C42)

Blower Motor Replacement (C42)

REMOVAL PROCEDURE




1. Disconnect the PCM.
2. Remove the coolant reservoir. Refer to Coolant Recovery Reservoir Replacement in Cooling System.
3. Remove the rear coolant recovery reservoir mounting stud.
4. Disconnect the cooling tube from the blower motor.




5. Disconnect the electrical connector (1).
6. Remove the blower motor mounting bolts (2).
7. Remove the blower motor.

INSTALLATION PROCEDURE




1. Install the blower motor.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the blower motor mounting bolts (2).

Tighten
Tighten the bolts to 4.5 N.m (40 lb in).

3. Connect the electrical connector (1).




4. Connect the cooling tube to the blower motor.
5. Install the rear coolant recovery reservoir mounting stud.
6. Install the coolant reservoir. Refer to Coolant Recovery Reservoir Replacement in Cooling System.
7. Install the PCM.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes
pro multis · About Operation CHARM