Fog Lamp Replacement - Front (Xtreme)

REMOVAL PROCEDURE




1. Raise the vehicle.
2. Ensure that the foglamp switch is in the OFF position.
3. Disconnect the electrical connector
4. Remove the push pins.
5. Remove the adjustment screw.
6. Remove the foglamp from the vehicle.

INSTALLATION PROCEDURE




1. Install the foglamp to the vehicle.
2. Install the adjustment screws.
3. Install the push pins.
4. Connect the electrical connector.
5. Lower the vehicle.
6. Re-aim the fog lights. Refer to Fog Lamp Aiming Procedure. Fog Lamp Aiming Procedure