Air Cleaner Outlet Resonator Replacement

REMOVAL PROCEDURE




1. Disconnect the breather tube from the air cleaner outlet duct.




2. Disconnect the intake air temperature (IAT) sensor harness connector.




3. Remove the air cleaner outlet duct retaining wingnut.




4. Separate the air cleaner outlet duct from the air cleaner by loosening the hose clamp after the mass air flow (MAF) sensor.
5. Remove air cleaner outlet duct.

INSTALLATION PROCEDURE

NOTE:
^ Handle the MAF sensor carefully.
^ Do not drop the MAF sensor in order to prevent damage to the MAF sensor.
^ Do not damage the screen located on the air inlet end of the MAF.
^ Do not touch the sensing elements.
^ Do not allow solvents and lubricants to come in contact with the sensing elements.
^ Use a small amount of a soap based solution in order to aid in the installation.




1. Install air cleaner outlet duct to throttle body.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install air cleaner outlet duct to MAF sensor.

Tighten
Tighten the hose clamp to 4 N.m (32 lb in).




3. Connect the IAT sensor harness connector.




4. Install the air cleaner outlet duct retaining wingnut.

Tighten
Tighten the wingnut to 2 N.m (18 lb in).




5. Connect the breather tube to the air cleaner outlet duct.