19. Crankshaft Rear Oil Seal Removal

Crankshaft Rear Oil Seal Removal

Notice: Do not damage the crankshaft surface when prying out the crankshaft rear oil seal.





1. Remove the crankshaft rear oil seal. Pry the crankshaft rear oil seal out with a suitable pry tool.
2. Clean the crankshaft rear oil seal to engine block mating surface.
3. Inspect the following areas:
^ Inspect the seal bore for nicks
^ Inspect the seal bore for burrs
^ Inspect the seal mating surface on the crankshaft for nicks