W/ Step Bumper

REMOVAL PROCEDURE




1. Ensure that the headlamp switch is in the OFF position.
2. Ensure that the ignition switch is in the LOCK position.
3. Release the lamp's retainer from the rear bumper by pulling the lamp up and tilting the bottom of the lamp away from the bumper.
Remove the lamp from the rear bumper by rotating it clockwise or counter-clockwise.




4. Rotate the bulb socket 1/4 turn counter-clockwise in order to remove the socket from the license plate lamp assembly.
5. Remove the bulb from the socket.
6. Remove the license plate lamp from the bumper.

INSTALLATION PROCEDURE




1. Install the bulb to the socket.
Rotate the bulb 1/4 turn to lock into place.




2. Install the lamp's retainer to the rear bumper by pushing the lamp up and in, then tilting the bottom of the lamp into the bumper.
Install the lamp to the rear bumper by rotating it clockwise or counter-clockwise.